The grease pump has a 100:1 ratio air motor.  The ACC-10K-Mini-Lube Grease Injection Pump is manufactured in Perth, Western Australia at the ACC Corporate facility.

The ACC-10K-Mini-Lube grease injection pump is supplied with a Heavy Duty 11” floating foot plate that can accommodate two (2) pail sizes, these being 20 and 40 pound pails.  

The Floating Foot Plate ensures contact with the grease and this results in a continuous prime of the grease injection pump.  The floating foot plate is inserted in the pail on top of the grease where it moves down as the grease below is extracted from the pail by the grease injection pump.

ACC-10K-Mini-Lube Grease Injection Pump Features:

  • 3.5 meters of 3/8” x Discharge Hose – 10,000 psi
  • 0.5 meters of 3/8" x Whip Hose – 10,000 psi
  • Liquid Filled Pressure Gauge - 15,000 psi
  • Gauge Cover
  • On / Off Valve
  • Safety Vent Coupler
  • "Z" Swivel on Whip Hose
  • Manual Pressure Relief Vent
  • Air Motor Oiler
  • Air Motor Regulator
  • Heavy Duty Floating Foot Plate
  • Maximum operating air motor air pressure of 100 psi
  • Maximum grease pump discharge - 10,000 psi
ACC-10K-Mini-Lube | ACC Corporate